求救~~~刚转了slingshot的all u can eat，连不上网~是不是路由设置出问题了？

shuang_777

从telecom转slingshot一个月了~打了无数个电话催slingshot的工作效率= = 昨天终于给我发了一封邮件说我all u can eat的账号被激活了，我可以使用宽带了= =
我自己买的Belkin的无线modem router基本款，设置了用户名和密码，可是一直连不上网络啊，是不是需要怎么设置router还是需要什么其他的东西？求高人赐教~~

amfilica

这个情况不明 等明天他们上班再说吧

wanghou

感觉还是设置错了

andylu90

How do I setup my Slingshot Broadband connection?
To setup your Slingshot broadband connection you should refer to the modem's instruction booklet. This will contain all the necessary information with regard to setting up your modem and broadband account.

If you did not receive a modem from Slingshot, please contact your modem's supplier.

The only ISP specific information you should require is the following:

Username: username@slingshot.co.nz
Password: this is the password you selected when setting up your Slingshot account

Primary DNS Server: 202.180.64.10
Secondary DNS Server: 202.180.64.11

The generic ADSL settings for New Zealand are as follows:
VPI should be 0
VCI should be 100
The Protocol needs to be PPPoA (PPP over ATM RFC 2364) with VC multiplexed encapsulation (VC-MUX).
Operating mode can be: G.992.1 G.DMT or ANSI T1.413 iss 2, but not G.Lite or G.992.2.
Your IP address should be dynamically determined.

Note: If you are unsure how to setup your ADSL modem, please call your modem manufacturer's technical
support number. You can also call our free Technical Support team on 0800 89 2000. PLEASE NOTE:
Slingshot's Technical Support is limited to Dynalink modems only.

shuang_777

谢谢了~~~我马上回去试一下~~~

JackingYao

他们的效率真是慢，我等了好几天都还没消息。