How do I setup my Slingshot Broadband connection?
To setup your Slingshot broadband connection you should refer to the modem's instruction booklet. This will contain all the necessary information with regard to setting up your modem and broadband account.
If you did not receive a modem from Slingshot, please contact your modem's supplier.
The only ISP specific information you should require is the following:
Username: username@slingshot.co.nz
Password: this is the password you selected when setting up your Slingshot account
Primary DNS Server: 202.180.64.10
Secondary DNS Server: 202.180.64.11
The generic ADSL settings for New Zealand are as follows:
VPI should be 0
VCI should be 100
The Protocol needs to be PPPoA (PPP over ATM RFC 2364) with VC multiplexed encapsulation (VC-MUX).
Operating mode can be: G.992.1 G.DMT or ANSI T1.413 iss 2, but not G.Lite or G.992.2.
Your IP address should be dynamically determined.
Note: If you are unsure how to setup your ADSL modem, please call your modem manufacturer's technical
support number. You can also call our free Technical Support team on 0800 89 2000. PLEASE NOTE:
Slingshot's Technical Support is limited to Dynalink modems only.