SILINGSHOT无限量体验（求正确设置）

南少

前几天从TLELCOM转成了SLINGSHOT，感觉网速还不错，我住在BLOCKHOUSE BAY，也可以看网络电视。有时候会遇到卡的现象，不过每天会遇到一个问题就是路由器设置问题，此前打了多次SLINGSHOT客服电话都没有人接听，已经有些绝望了，希望在这里能找到正确的答案。就是使用SLINGSHOT的账户与密码是不是填写在WAN里面User Name和Password就可以了？帐户名后面有后缀名吗？还是需要其他的设置吗？静待有知情人士帮忙谢谢~！

chinesekiwi

不需要后缀 没有别的设置了

pgsheng

username@slingshot.co.nz
密码就是密码

人间五十年

我家的没有填后缀名，也连接上了

无过

LS正解，不用学Telecom加什么xadsl

andylu90

How do I setup my Slingshot Broadband connection?
To setup your Slingshot broadband connection you should refer to the modem's instruction booklet. This will contain all the necessary information with regard to setting up your modem and broadband account.

If you did not receive a modem from Slingshot, please contact your modem's supplier.

The only ISP specific information you should require is the following:

Username: username@slingshot.co.nz
Password: this is the password you selected when setting up your Slingshot account

Primary DNS Server: 202.180.64.10
Secondary DNS Server: 202.180.64.11

The generic ADSL settings for New Zealand are as follows:
VPI should be 0
VCI should be 100
The Protocol needs to be PPPoA (PPP over ATM RFC 2364) with VC multiplexed encapsulation (VC-MUX).
Operating mode can be: G.992.1 G.DMT or ANSI T1.413 iss 2, but not G.Lite or G.992.2.
Your IP address should be dynamically determined.

Note: If you are unsure how to setup your ADSL modem, please call your modem manufacturer's technical
support number. You can also call our free Technical Support team on 0800 89 2000. PLEASE NOTE:
Slingshot's Technical Support is limited to Dynalink modems only.

刚换过去的时候他们没告诉我这个..
他们好像不会给 很郁闷..我是自己开着拨号找的