The flow rate is the amount of water flowing from a shower or tap. To measure flow rate you will need two things:
流量是从淋浴器或水龙头流出的水量。 要测量流量，您需要两件事：
*A bucket or large jug with measurement一个带尺寸的桶或大水壶
*A stopwatch (or count of 10 seconds).秒表（或 10 秒计数）。
The steps are as follows:
步骤如下：
Turn the shower or tap on to its normal setting and let it flow into the bucket for 10 seconds.
将花洒或水龙头调至正常设置，让水流入桶中 10 秒钟。
Measure the amount of water in the bucket and multiply it by six.
量桶中的水量并将其乘以六。
在乘以6的步骤中，由于测量时间只有10秒钟，因此需要将结果乘以6，以便得到每分钟的流量。
Use the chart below to check whether your shower or tap flow rate is excellent, average or excessive.
使用下表检查您的花洒或水龙头流量是极好、平均还是过高。
发表于 2023-5-4 14:04:44
分享
收藏
