请大家远离倒霉路61*号的G牙医

56514910@qq.com

--禁止提及任何商家的隐私信息--

刚来新西兰，看了报纸上的广告去了某牙医诊所做烤瓷牙。花了1000刀，结果咬合过低，但他坚持说就是应该这样。第二次去那里补牙，过程中感觉他在故意磨除我的部分牙齿，当时以为是错觉，但补牙结束以后发现真的是这样，问他为什么要这样做，这位医生竟然当场就矢口否认。也许这样说大家不能理解，举个例子你们就会明白，左边的烤瓷牙做的太低，咬合不到上面的牙齿，他不是想办法去解决这个问题，而是将另一半相同位置的牙齿给故意磨低，想当然的要让左右牙齿咬合变得平衡。试问如果你的鞋买小了，我拿个锉刀把你的脚给磨小一圈，你会答应嘛？没有技术就算了，还没有医德，这样的人怎么配做一个合格的牙医。本人已经通过律师，找回了一个公道。要让这种人知道别再这样肆无忌惮的下去，我们留学生也会用法律和律师让你付出代价的。希望你自己好自为之，不要再继续做这种见不得人的事情，败坏华人牙医的名声。

在此提醒各位，这边看牙医一定要选择正规的洋人诊所，每次结束都要留好发票和医生给的诊断书，如果日后有纠纷这些就都是证据。如果你觉得找律师太费钱，也可以自己直接写信给这边的牙医协会New zealand dental council 投诉。最后奉劝大家，远离这家无良的倒霉路61*号的G牙医

boris28

Go to smile dental, they are very good.

56514910@qq.com

ELAINEMIN 发表于 2015-10-15 22:56
谢谢楼主，差点我就要过去看了

感谢上帝，找个洋人诊所吧。价格都差不多，买个放心。洋人有信仰，不会乱来

ELAINEMIN

谢谢楼主，差点我就要过去看了

boris28

In most situation,  the adjustment is less than 1mm,  just to round of the sharp tip of the opposing cusp.  Also you can think in this way too.  Your dimension between two teeth are fixed.......  if Dr. G crown doesn't fit and too high, the only reason is when he does his crown preparation,  he didn't remove enough tooth to create enough room for his lab to make the crown.  or he didn't choose the right material which can fit into that thickness, or he just use a useless lab or technician to do the job, that's why the job comes back very bad.      If he use a good technician, he has two options,  either he need to remove more tooth on the crown tooth, so he has enough spaces to remake a new one, or he adjust the opposing.......  the crown tooth has already gone thru a lot of reduction already and sometimes if it get too close to the nerve, dentist just cant go too far, otherwise you will end up with a root canal treatment on top because of nerve damage.  Therefore, In the perfect world, if Dr G is good, and his lab is good,   He should have prep the tooth to standard dimension with enough room for his technician to make the right thickness crown, and fit perfectly without the need of any adjustment.  So Either he under prep the tooth, and technician has no choice to make it thicker, or he just send to a cheap lab (or oversea back in china lab) and the technician didn't do a good job which make the crown too thick.

boris28

To be Honest, Its not uncommon of doing some adjustment of the opposing tooth with care.  In a lot of situations, the opposing tooth is too over-erupted, Too pointy, too sharp, and interfere with the occlusion, we will need to take a balance view and do some minor adjustment in order to get a long term stable occlusion.  For example, if you have lost a lower filling for a long time and one of the cusp of top opposing tooth might over erupted into the that missing filling space..... We will only have 2 options, either fill the hole with a super low filling, or we adjust the over erupted cusp and therefore we can restore the bottom tooth back into its original shape.  I wish reader to understand,  all teeth are subject to a lot of wears and tears, whether its artificially or naturally.  A careful calculated adjustment is much better than having a super shallow and underfilled filling in long run.  Please think about it in this way,  Taichi, is about Yin, Yang,  which means balance..... Same as Teeth Occulsion.  If you have one over erupted tooth n u make the opposing one too low,  it will affect the stability of the bite and occlusion and in severe cases, it can cause TMJ, and Jaw Problem.  Therefore,  if its only a slight adjustment in order to get a good balance,  opposing tooth can be adjusted.  But obviously, its need to be minimum preparation and also inform the patient at the time.  For this particular case,  When a dentist doing a crown preparation, a careful design is very important in order to ensure enough room for the crown and avoid adjustment of opposing tooth later on.  That's why Smile Dental use Cerec and computer scanning technique so we can get the very accurate crown and occlusion as well.  I hope dear readers can try to understand from the dentist point of view.  I think at the end, communication is the key of avoiding misunderstanding.   

boris28

wgtn_emma 发表于 2015-8-28 11:44
弱弱地问一下，这里的牙医，算本地学历的，不就otago吗？otago不是以牙医科出名能在世界上有个排名的吗？ot ...

I thought he is graduated from oversea and come here to get registration.

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddddddd

56514910@qq.com

逗逗 发表于 2015-10-12 13:35
那个论坛上经常出现的牙医也是没经过我的允许就磨了我正常的牙齿，牙医通病吗？ ...

天煞的货

逗逗

那个论坛上经常出现的牙医也是没经过我的允许就磨了我正常的牙齿，牙医通病吗？

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-10-10 13:47
ddddddddddddddddddddddddddddddddd

dddddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddddddd

56514910@qq.com

贝贝他爸 发表于 2015-10-8 09:22
顶一下，感谢楼主分享

贝贝他爸

顶一下，感谢楼主分享

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddddd

李小鹏

远离这家无良的倒霉路61*号的G牙医

BP2013

G牙医，是狗牙医吗？

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

ddddddddddddddddddddddddddddddddddddddddd

56514910@qq.com

56514910@qq.com 发表于 2015-7-24 23:37
同感

dddddddddddddddddddddddddddddddd