请教如何油漆铁门?

snoopytiana

打算把重新油漆铁门?已经部分生锈了,要用沙纸或者什么东西进行去锈吗?
请教大家谁了解过程啊?

另外,木重新油漆如何呢?

谢谢

snoopytiana

谢谢,木门用不用CLEAN后,SAND一次啊?
另外,SAND PAPER用那个号的?

玉树临风

铁锈是非常难处理的.
如果大面积是平面的话,用砂轮打掉绣更简单.
如果不是的,就先用除锈漆,品种很多,如果是螺丝位或者转角位可以用专用的钢刷.,切记带橡胶手套.
然后上金属底漆.一遍也可以.然后最好上普通的油性面漆就好了.颜色随意.

[ 本帖最后由 玉树临风 于 2009-9-1 19:15 编辑 ]

alanz

From my experience of painting iron roof, you need to use Quick Rust Remover to remove rust first, then do some sanding if rust is not cleaned. Then clean carefully. Then apply Quick Rust primer paint twice. Then paint with top coat twice. All paint must be suitable for iron becuase iron change size with different temprature.

Quick Rust is a product from Dulux. You can buy it from Bunnings or Miter 10 mega.

For wooden door it would be much simpler. Just clean first and apply primer and top coat. Use wood paint.