Crucial M4系列SSD新版修正Firmware

3rdman

http://www.crucial.com/support/firmware.aspx

Release Date: 01/13/2012
Change Log:

Changes made in version 0002 (m4 can be updated to revision 0309 directly from either revision 0001, 0002, or 0009)
Correct a condition where an incorrect response to a SMART counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat once per hour after reaching this point. The condition will allow the end user to successfully update firmware, and poses no risk to user or system data stored on the drive.

This firmware update is STRONGLY RECOMMENDED for drives in the field. Although the failure mode due to the SMART Power On Hours counter poses no risk to saved user data, the failure mode can become repetitive, and pose a nuisance to the end user. If the end user has not yet observed this failure mode, this update is required to prevent it from happening.

If you are using a SAS Expander please do not download this Firmware. As soon as we have a Firmware Update that will work in these applications we will release it.

-------------------------------

我自己的刷出來的對比
firmware 0009 vs 0309

D1NZ

謝謝你的分享 只用 Intel SSD 的我路過

pgsheng

不错，回去更新一下，数据不会丢这个挺好，省事了

matthewdiao

顶好人分享。。。。。。。。。。已经定了一朋友的M4 128G的，拿到手先刷了先

matthewdiao

顶上去。。。明天有用

东

这个是好东西  谢谢分享~