WIFI Router Bridging

韩咲

原来用的Belkin N150 Router,现在买了个TP-Link的TL-WR841N的Router,想把WIFI范围扩展一些,想知道如何Bridging?

谢谢.

Belkin里面没看到有WDS或者Bridging的选项只有一个是enable Access Point的.
TP-Link的有WDS,设置好后,电脑连得上TP-Link,但是TP-Link连不上Internet(Belkin).

ztswyz

http://www.belkin.com/support/ar ... d=1478&scid=221
lz 以后要学会用google

Summary

This article describes how to configure WDS (Wireless Bridging) in the 54g router
More Info

To upgrade your  router to support WDS (Wireless Bridging), click here

To upgrade your access point to support WDS (Wireless Bridging), click here

Router Configuration

1. Open a Web Browser
2. In the address bar type http://192.168.2.1
3. Click on Wireless Bridge in the left hand column under Wireless
4. Enter your password if any and click Submit
5. Check the box that says Enable Wireless Bridging, click Apply Changes.
6. Click Home, note the WLAN MAC address under LAN settings

Access Point Configuration.

1. Open a Web Browser
2. In the address bar type http://192.168.2.254
3. Click on Wireless Bridge in the left hand column under Wireless
4. Enter your password if any and click Submit
5. Check the box that says, Enable Wireless Bridging
6. Check the box that says, Enable ONLY specific Access Points to connect and enter the WLAN MAC address from the router, click Apply Changes.
Note: The channel must be identical on both the router and the access point.

Note: The WDS feature is not completely specified in IEEE or Wifi standards. Therefore interoperability between 802.11 products of different vendors is not guaranteed.

韩咲

谢谢你的回复.

我search过,没有多少关于N150这款wireless router的信息.

而且你回复的是不同型号的router.

Xeon电脑

刷过DD-WRT设置就很简单了

韩咲

Belkin N150 刷不了,不支持.

韩咲

问题是我怀疑Belkin N150不支持WDS,所以设置不了Bridging.

韩咲

试过了第一个不行,都是一样,估计是Beklin的Router不支持WDS.
第二个对TP Link的没什么意义,因为怀疑的Belkin的问题,而不是TP-Link的问题.