新西兰天维网社区

标题: AMD 1055t 六核心簡測! [打印本页]

作者: 3rdman    时间: 2010-5-29 02:40:02     标题: AMD 1055t 六核心簡測!

本帖最后由 3rdman 于 2010-5-29 12:48 编辑

First of all, thanx ComputerLounge for the great deal :D

sold my i7 920 set for this, coz i'm no longer into pc games (at least till Diablo3), gonna stick with onboard video for a while.
since NZ's power bill is high, i usually do is low volt oc (not too over cpu vid), thus need to find a balance between performance vs power consume.

also i got the silverstone penetrator 18cm fan today, it's way to huge to settle in any location on my bench table.....so yeh.
i was putting it like this, but i found it won't push enough air thru the second heatsink wall.


then i found this works better, even 1/3 the fan isn't blowing anything ..lol , so i strongly suggest if u are getting this, please wait for the 14cm model (the 12cm model is crap too)


gears.

CPU: AMD 1055t (locked multi, max 14, turbo@16)
MB: Asus M4A89GTD Pro (no usb3.0 version)
RAM: Kingston HyperX 1600 2gx2 CL8
PSU: ACBEL R8 800
HDD: Intel X25-V 40G + Samsung F3 Raid0
VGA: onboard @ 900 with 1.225v NB volt.

*please do note if your Samsung F3 won't work on SB850 board, go update the firmware from Samsung it will fix the problem.
*in this test i won't be recording any temp, since hex core's temp are screwed....ambient temp 23c, and my cores are like 16c~17c idle =_=" that's just not right will upate the temps once asus release newer bios to fix this


BIOS settings
257x14 @ 3.6G (turbo off)
CPU volt @ 1.35v under bios (with lastest bios please enable the volt drop setting, setting at "auto" might be unstable)
HT Link @ 2321
CPU/NB volt @ 1.1375v
RAM @ DDR1720 9-9-9-24 1t unganged
RAM volt @ 1.5v

here's my simple test for stability HyperPI 32mb x6


some cinebench tests


might do some x264 tests later, since that's the main reason that i shift from i7, coz amd hex can actually compete with i7 in x264 encoding.

with i7 low volt oc with ATI 4770 undervolt i was at 120watts IDLE / 200watts LOAD
now with this setting i'm at 95watts IDLE / 177watts under hyperPI LOAD

pretty sweet rig i say, did a rough 4g test for cinebench and it was at 1.485v...will do some stability test later :0

-cheers
作者: 一天    时间: 2010-5-29 17:26:58

本帖最后由 一天 于 2010-5-29 16:33 编辑

原来AMD CPU也可以很强大,等x264评测。不过我x264 DVD 2pass 从Rip 加上 声轨压缩,双核也就2-3 小时,偶尔压压也可以了,值得想想的就蓝光压缩了。

话说我前些天也低超了一下家里的赛扬机,主力机研究了一下,降回了主频,设置了个稍微智能点的电源方案,对我来说能关机的话应该最省电。。。

电源是750W的,我看是OverKill了,不知道会不会对综合能耗有负面影响?

感兴趣的话,这是我找到的楼主的主板评测:
http://www.anandtech.com/show/2959/3
作者: 3rdman    时间: 2010-5-29 18:33:36

amd我覺得從他的 550be開核之後就一直很超值了
可惜core to core性能一直不如人, 只好把quad硬塞兩個核心變成hex, 至少專業算圖跟影片轉檔上不會輸人囉

要不是我現在走onboard video路線, 不然加上4770一樣耗電量會超過i7
作者: Xeon电脑    时间: 2010-5-29 20:40:26

onboard video太浪费了吧
作者: 3rdman    时间: 2010-5-29 21:06:06

沒玩遊戲阿...所以onboard就夠用了




欢迎光临 新西兰天维网社区 (http://bbs.skykiwi.com/) Powered by Discuz! X2