新西兰天维网社区

标题: 求水工! [打印本页]

作者: 苹果绿茶    时间: 2010-4-12 17:41:47     标题: 求水工!

家里想换个好一点的马桶,而且马桶下面有点漏水,请问大家有好的水工推荐吗?谢谢啦
作者: 苹果绿茶    时间: 2010-4-13 11:54:17

求。。。。。。。。。。。。。。
作者: 苹果绿茶    时间: 2010-4-14 19:12:24

求。。。。。。。。。。。。。
作者: 回味_人生    时间: 2010-4-14 19:34:09

路过 帮顶..................................
作者: 苹果绿茶    时间: 2010-4-14 23:12:27

大家有用过不错的水工推荐吗?
作者: 苹果绿茶    时间: 2010-4-15 22:44:19

求。。。。。。。。。。。。。
作者: yangki    时间: 2010-4-16 07:57:51

好水工难求, 呵呵
作者: 苹果绿茶    时间: 2010-4-16 11:38:25

是啊,就是想看看有没有大家用过觉得不错的,唉,难啊
作者: zhh2007    时间: 2010-4-16 17:42:22

楼上就是水工,不过看他做不做旧房了。
作者: 苹果绿茶    时间: 2010-4-16 20:52:38

看来人家对我这个小活没什么兴趣啊
作者: yangki    时间: 2010-4-18 08:53:14

lz找的是好水工, 俺不好的。。。。

为人民服务版上就有很多好的水工
作者: 苹果绿茶    时间: 2010-4-18 13:07:47

楼上的太谦虚了吧?
作者: 苹果绿茶    时间: 2010-5-19 16:33:00

求。。。。。。。。。。。。。
作者: yangki    时间: 2010-5-22 12:17:28

本帖最后由 yangki 于 2010-5-23 08:18 编辑

转自 一间auckland 洋人水工的收费方式
How much does it cost?
Monday to Friday 7.30am – 5.00pm our standard rates apply. All rates below include GST:
$90 for the call-out, which includes the first hour. There is no separate vehicle or mileage charge. Please note time starts from when the plumber departs.
Subsequent hours are charged at $75 per hour for plumbing. Gasfitting is charged at $100 per hour. Due to the large variety of fittings and materials used in plumbing, it is common for the plumber to make a trip to a plumbing merchant for supplies. Time away from your house for this purpose is of course charged to the job.
After hours, weekends and public holiday call-outs are charged at $150.00 per hour, with a two-hour minimum charge.
Here are some typical figures for some of our most common jobs:
Valve replacements on low-pressure hot water cylinders range between $200-$275.
Tap replacement approx $90 - $150, excluding tap and materials.
Leaking toilet inlet valve approx $140 including materials.
Leaking toilet outlet valve washer change approx $95 including materials.
作者: riohousenopork    时间: 2010-5-22 12:31:30

021556191   小陈
作者: mkww01    时间: 2010-5-22 18:05:36

漏水的马桶修过四个,问题有上水控制阀,排水胶垫,费用有花2元换胶垫,30-40换上水阀。换新马桶自己做主要接管要选对。
作者: josechen    时间: 2010-5-22 19:28:09

想找个好的水工把家里浴室的分开的冷热水换成冷热水一起的水龙头,请朋友帮忙介绍好的水工,有2套房子都需要换,谢谢!




欢迎光临 新西兰天维网社区 (http://bbs.skykiwi.com/) Powered by Discuz! X2